New! TCFI Gen 7 Fuel Injection Controller for 2014-2016 Harley-Davidson® Touring Models with Electronic Throttle Control.  TwinCooled® Models Now Supported!

 

TCFI Features and Benefits

· Fully programmable plug-in replacement for 54 pin Delphi® controller with CAN data bus used on 2014-2016 touring models with electronic throttle control, TwinCooled® Models now fully supported.

· Quickly auto-tune fuel curves for front and rear cylinders on a dyno or on-road with new WEGO IIID dual channel wide-band oxygen sensor interface

· Robust alpha-N (throttle position and RPM based) fuel control eliminates problems with long duration/high overlap camshafts

· Extended data logging and diagnostics. DataFLASH memory stores full 60 minutes of operating data at 10 samples/second.

· Powerful Windows software for custom programming and data analysis

· Programmable user input for functions such as two stage RPM limiter, nitrous retard, and shift kill and output

· Programmable user output for functions such as shift light, nitrous activation, and electric shifter

· Billet aluminum housing with black anodized finish

· Easy plug-in installation

 

 

Major TCFI Advantages over Competitive Systems

  • · Real-time and continuous auto-tuning with monitoring, control and override capability. No other commercially available system offers all these capabilities. For a more in-depth explanation of what this means and why it so important, please visit the TCFI Tech FAQ.

    · User friendly PC Link software with 3-D graphics and easy spreadsheet editing capabilities. For example, changing a block of cells in our advance table takes only a few mouse clicks. But don't take our word for it, check it out yourself. Download and play around with our PC Link TCFI software. Then try the same editing in the ThunderMax® SmartLink software and draw your own conclusions.

    · Built-in data logging. Competitive ThunderMax® systems lack built-in data logging. Without built-in data logging, it is almost impossible to diagnose real-world problems. Download our TCFI Log software and look at the sample data logging file.

    · Knowledgeable and prompt technical support. At Daytona Twin Tec, you can always reach a technician during normal business hours. You won't be told to send an email and wait for a response. In some situations, we may ask you to email us your current setup file and a data logging file that shows the problem, but an initial conversation is always with a trained technician. After hours and weekend support is available for racers.   

 

Visit the TCFI Tech FAQ for more detailed information about using the TCFI in performance applications!

 

 

New Bluetooth Interface

Part Number 18012

Wireless connectivity for our existing software. Requires laptop PC with Bluetooth capability.  Windows 7 recommended.

Required when using TwinView application on Android tablets.

 

Real Time Engine Data Display on Windows 8 Tablets

Instrument panel display showing all engine parameters. Facilitates initial tuning and diagnostics, especially on motorcycles without a tachometer.

Requires Windows 8 tablet, such as the Acer Iconia W3 shown at left, and our Bluetooth interface. All of our tuning software will run on the tablet.

 

New TwinView Application for Android Tablets

Instrument panel display showing all engine parameters. Facilitates initial tuning and diagnostics, especially on motorcycles without a tachometer. GPS speed display allows quick speedometer calibration.

 

Requires Android tablet, such as the Google Nexus 7 shown at left, and our Bluetooth interface. TwinView is third party Android application available on Google Play.

 

Order online using Paypal or call us at 386-304-0700  (Monday-Friday 9 AM to 5 PM Eastern time) for credit card and COD orders. For online orders, please email any special instructions to sales@daytona-twintec.com. 

 

All products covered by our 1 year limited warranty.

 

We offer a 45 day return privilege for all TCFI retail customers that purchase the system direct from us. If you are not 100% satisfied with your TCFI system, you can return the system and we will issue you a full refund of your purchase price, less shipping.  

 

Part Number Description Suggested Retail
17800 TCFI Gen 7 Fuel Injection Kit (for 2014-2016 touring models with electronic throttle control and CAN data bus. Includes TCFI Gen 7 plug-in fuel injection controller, USB interface for PC link, software, WEGO IIID dual channel wide-band exhaust gas oxygen sensor interface, two Bosch LSU 4.2 wide-band exhaust gas oxygen sensors, and two 18 x 1.5mm weld nuts for exhaust pipes). Not legal for sale or use in California or on any pollution controlled vehicles. $885.00

 

 

18012 Bluetooth Interface (provides wireless connectivity for TCFI/VRFI series engine controls. Requires laptop PC with Bluetooth capability. Windows 7 recommended. Required when using TwinView application on Android tablets). Not legal for sale or use in California or on any pollution controlled vehicles. $94.00

18015 TCFI Gen 5/Gen 7 Power Adapter (12 volt power supply for bench top programming of TCFI Gen 5 and Gen 7 systems. 110-240 VAC multi-plug international compatibility)
$114.00

 

The TCFI kit includes the WEGO IIID dual channel wide-band exhaust gas oxygen interface that allows quick auto-tuning on a dyno or on-road during actual riding conditions. The kit includes Bosch LSU 4.2 wide-band sensors for both front and rear cylinders. The user programs a table with the desired air/fuel ratios - the system then does the rest. Competitive systems claim auto-tuning capability. Visit our Tech FAQ and find out why the TCFI system is superior. 

The TCFI solves tuning problems with highly modified engines. Competitive “band-aid” products that interface to the Delphi® controller still rely on speed-density fuel control. Long duration/high overlap camshafts wreak havoc with manifold pressure - especially at idle and cruise RPM. Speed-density based fuel control simply can’t cope.

High-end automotive racing systems use alpha-N (throttle position and RPM based) fuel control. Alpha-N eliminates any dependence on manifold pressure and is unaffected by long duration/high overlap camshafts. The TCFI brings this proven technology to the H-D® marketplace.  

The TCFI has the same ignition control as our proven TC88/TC88A Twin Cam ignition systems with fully programmable advance curves. Idle air control including idle RPM and cold start characteristics are also fully programmable. This facilitates the use of throttle bodies modified for higher airflow.

2014+ touring models use CAN data bus for communications between the engine control module (TCFI), instrument cluster, and body control module (BCM). The TCFI fully supports the CAN data bus. The TCFI also has built-in data logging that stores data for the last 60 minutes of operation at 10 samples/second. A USB interface and Windows compatible software allow the use of a laptop PC for programming and data analysis.

 

   

 TCFI Installation

 

 

Wide-Band Oxygen Sensor on Front Pipe

 

Wide-Band Oxygen Sensor on Rear Pipe

Download TCFI Installation & Tuning Manual 

The TCFI is intended for high performance race engines that are expected to produce over 100 HP. The TCFI has been tested on engines up to 145 CID and 170 HP. We provide setup tables that will get you up and running. From a practical standpoint, tuning any fuel injection system requires an exhaust gas analyzer. You can either spend a lot of time on a dyno with an exhaust sniffer (like the newer Dynojet units) or you can use our WEGO. With the WEGO, the system will auto-tune the fuel tables while you ride the bike - you won't need to spend any time on a dyno. Auto-tuning under actual riding conditions only takes a few hours and gives much more realistic results that dyno tuning. Air-cooled engines are very sensitive to thermal effects and dyno systems generally have inadequate cooling airflow.

 

Special Speed-Density Versions for Turbo/Supercharged Applications 

Daytona Twin Tec can supply special TCFI units with speed-density firmware that supports turbo/supercharged applications with up to 3 bar (300 kPa) manifold pressure. The only required electrical modification to the motorcycle is that a Delphi 3-bar (40-304 kPa) MAP sensor must be installed in place of the OE MAP sensor. Higher flow rate fuel injectors and/or additional fuel injectors are also required for most applications. The TCFI system can drive up to four injectors (two per cylinder). The system also supports fuels such as E85. For more information, refer to the TCFI 300 kPa Speed-Density Firmware Tech Note. Additional materials including a fuel calculator are available on our download page

 

PC Link Software for Programming Custom Advance and Fuel Tables

PC Link software runs under Microsoft Windows XP/Vista/7/8/10. We no longer support older Windows versions. PC Link allows the user to program all the engine control tables and parameters within the Twin  Tec TCFI system. Minimum PC requirement is a 300 MHz Pentium with super VGA display (SVGA with 1024 x 768 pixel resolution). The TCFI connects to the PC by means of a USB interface. A USB cable is supplied with the unit. The PC must have a free USB port. For more details, please refer to our PC Link Tech FAQ.

3D tables are used for ignition advance and fuel control. Additional 2D tables are used for functions such as cold start enrichment and idle air control. Some sample tables are shown below. 

On all touring models, the ECM (engine control module) converts signal pulses from the VSS (vehicle speed sensor) to data that is transmitted to the instrument cluster. Scaling (in terms of VSS frequency/speed) varies slightly between models depending on tire size and gear ratio. You can use PC Link software to change the default scaling and recalibrate the speedometer/odometer. For more detailed information, we suggest that you download the software and instructions. 

Sample 3D Ignition Advance Table

 

Sample 3D Air/Fuel Ratio Table

 

Sample 2D Idle Speed Table

 

 

Sample Engine Control Parameters Screen

 

The TCFI also features a user input and user output that can serve various functions (not available on TCFI EX version). The user input can be configured for data logging (such as the status of a switch), ignition retard, ignition kill (for air shifter), or stage RPM limit. The user output can drive a relay and be configured as a general purpose RPM and throttle position based switch or to trigger an NOS system.  

User Functions Screen

PC Link software is free! You can always download the latest version of the software and instructions (contained within the TCFI Installation & Tuning Manual) from our website. The software will run in demo mode without a TCFI system attached. For your convenience, we include a copy on CDROM when you purchase the TCFI system.

Download PC Link TCFI Software 

 

TCFI Data Logging Software

The TCFI features comprehensive data logging capability. During dyno testing, you can display real time engine data on an instrument panel type screen. The TCFI stores data for the last 60 minutes of operation at 10 samples/second. You can download and display this data on a chart recorder type screen. Data is available for all sensor inputs and output functions. The TCFI data logging capability greatly facilitates fine tuning and diagnosis of driveability issues. The data logging software, TCFI Log, has the same PC requirements as described above for  the PC Link software. For more detailed information, we suggest that you download the TCFI Log software and instructions. The software download includes a sample file with actual data.  

 

Real Time Engine Data Display

 

 

Data Logging Chart Display

The data logging software also allows you to download operating statistics and historical diagnostic codes.  Downloaded operating statistics are displayed as shown below. Total hours represents the total time that the engine was running. ID represents the firmware identification. This field typically includes the manufacturer (Twin Tec), model number, program revision and author's initials, and date. Elapsed time is displayed for 13 RPM bands from idle to 6999 RPM. The utility also displays the maximum engine RPM, time at the RPM limit (in seconds for better resolution) and the number of engine starts. All this data can be printed to provide a permanent record. The data stored in the module for maximum engine RPM and time at the RPM limit  can be cleared. All other elapsed time and engine starts data is permanent. 

Any historical diagnostic codes logged by the TCFI are listed along with the number of trips (engine start cycles) since the individual code was last logged. The software can also clear diagnostic codes. 

 

Operating Statistics Data

 

The elapsed time data in the various RPM bands can be displayed in the form of a histogram chart by clicking on the Histogram button. Clicking on this button causes the chart shown below  to appear. Color coding of the bars helps to interpret the data. The idle RPM band is blue, normal operating RPM bands are green and high RPM bands are yellow and red. The chart is automatically scaled for best display.  

Operating Statistics Histogram Chart

 

TCFI Log software is free! You can always download the latest version of the software and instructions (contained within the TCFI Installation & Tuning Manual) from our website. The software will run in demo mode without a TCFI system attached. For your convenience, we include a copy on CDROM when you purchase the TCFI system.

Download TCFI Log Software